ATI Bubble Master 200
Complete with collection cup, built-in gate valve to fine tune the skimmer's performance, air silencer and submersible ATI-Sicce pump.
In-sump installation only.
"Thread-Wheel" design yand super efficient ATI-Sicce pump produce an extremely dense water/air mixture that outperforms much larger skimmers while consuming less electricity and transferring less heat to the aquarium.
For every 3 parts of water the pump pulls in 2 parts air for an efficiency rating of approximately 67%. Most other skimmers on the market have an efficiency of less than 35%.
Power Consumption: less than 40 Watts/0.6 Amps.
Recommended Tank Size: up to 250 gallons.
Dimensions: 12.6" x 8.5" x 19.6" (L x W x H)
Ati bubble master skimmer $100
-
eric the red
- Discus Member
- Posts: 165
- Joined: Wed Sep 12, 2012 3:55 pm
- My SetUp: Equipment: 225 gallon (72x30x24), 3 radion pros, 2 48" t5s (ato blue plus), 2 mp40s, full apex with ph probe, wxm module, brs gfo reactor, reef octopus nwb200, DIY ATO with Kalk in reservoir water, two micom dosers (dosing 2 part) Livestock is mostly zoas/palys and sps. I also have quite a selection of high end Lps on the sand bed.
- Location: Ocean Springs
-
eric the red
- Discus Member
- Posts: 165
- Joined: Wed Sep 12, 2012 3:55 pm
- My SetUp: Equipment: 225 gallon (72x30x24), 3 radion pros, 2 48" t5s (ato blue plus), 2 mp40s, full apex with ph probe, wxm module, brs gfo reactor, reef octopus nwb200, DIY ATO with Kalk in reservoir water, two micom dosers (dosing 2 part) Livestock is mostly zoas/palys and sps. I also have quite a selection of high end Lps on the sand bed.
- Location: Ocean Springs