Looking for something
-
- Discus Member
- Posts: 983
- Joined: Sun Oct 25, 2009 6:49 am
- My SetUp: AGA 150g 48x30x25, Reef Octopus Skimmer, Bio Pellet, Phosphate, Carbon reactor. Mostly a SPS coral tank with a few zoas a Green Polyp Toadstool, a Chalice or two and a couple of Scollys thrown in there. Top Off System and dosing pump system for Calcium and Alk.
- Location: D'Iberville Mississippi
Looking for something
I am looking for some acrylic rods, I have tried Lowes and Home Depot in Biloxi, no go. I am going to redo the Aqua Scapeing in my tank and I want to drill the live rock and use these rods to build the structures I want. I was thinking about just using some small PVC pipe if I can't find the acrylic. Anyway if ya'll come across some let me know.
- Doug
- Site Admin
- Posts: 229
- Joined: Tue Nov 30, 2004 11:26 am
- My SetUp: 1984: 90 gal. saltwater, O'Dell tank, Oceanic Systems cabinet stand, (2) Perfecto 48" strip lights with Vita-Lite Power Twists, Aqualogy Bio-Grade Plus Undergravel filter, (2) Hagen Aquaclear 800 power heads, Eheim 2217 canister filter with Chemi-Pure, Hawaiian Marine Angstrom 2537 UV sterilizer
Re: Looking for something
Try the Yellow Pages under Plastics.
-
- Discus Member
- Posts: 983
- Joined: Sun Oct 25, 2009 6:49 am
- My SetUp: AGA 150g 48x30x25, Reef Octopus Skimmer, Bio Pellet, Phosphate, Carbon reactor. Mostly a SPS coral tank with a few zoas a Green Polyp Toadstool, a Chalice or two and a couple of Scollys thrown in there. Top Off System and dosing pump system for Calcium and Alk.
- Location: D'Iberville Mississippi
Re: Looking for something
Will do
- Doug
- Site Admin
- Posts: 229
- Joined: Tue Nov 30, 2004 11:26 am
- My SetUp: 1984: 90 gal. saltwater, O'Dell tank, Oceanic Systems cabinet stand, (2) Perfecto 48" strip lights with Vita-Lite Power Twists, Aqualogy Bio-Grade Plus Undergravel filter, (2) Hagen Aquaclear 800 power heads, Eheim 2217 canister filter with Chemi-Pure, Hawaiian Marine Angstrom 2537 UV sterilizer
Re: Looking for something
And be prepared to get out your wallet...
Years ago, in building a reverse-flow undergravel, we were told we had to use Excelon clear PVC pipe in saltwater. Today, we know that's not necessarily true, but that stuff was EXpensive.
Years ago, in building a reverse-flow undergravel, we were told we had to use Excelon clear PVC pipe in saltwater. Today, we know that's not necessarily true, but that stuff was EXpensive.
-
- Discus Member
- Posts: 983
- Joined: Sun Oct 25, 2009 6:49 am
- My SetUp: AGA 150g 48x30x25, Reef Octopus Skimmer, Bio Pellet, Phosphate, Carbon reactor. Mostly a SPS coral tank with a few zoas a Green Polyp Toadstool, a Chalice or two and a couple of Scollys thrown in there. Top Off System and dosing pump system for Calcium and Alk.
- Location: D'Iberville Mississippi
Re: Looking for something
My wife may have changed my mind for me, lol. She says she likes the tank the way it is.
-
- Discus Member
- Posts: 165
- Joined: Fri Oct 23, 2009 5:27 pm
- My SetUp: Custom profile field not completed.
- Location: Saucier
Re: Looking for something
I've heard some people cut up plastic coat hangers for rods.
- Gerwin
- Discus Member
- Posts: 1498
- Joined: Tue Nov 30, 2004 3:41 pm
- My SetUp: Custom profile field not completed.
Re: Looking for something
thats a good ideaphisher wrote:I've heard some people cut up plastic coat hangers for rods.
also check out US Plastics, they may have what you want
-
- Discus Member
- Posts: 236
- Joined: Fri Nov 13, 2009 6:12 pm
- My SetUp: Custom profile field not completed.
Re: Looking for something
i thought about doing the same thing, especially since i am always knocking my rocks down and the stupid epoxy wont cure under
water...dont know how my coral's have survived...lol. anywy i found some pretty good deals on ebay...although i decided to just save for my lights and skimmer for my 90 gal.
water...dont know how my coral's have survived...lol. anywy i found some pretty good deals on ebay...although i decided to just save for my lights and skimmer for my 90 gal.